Spherical Roller Bearings CA | 球面滚子轴承 CA

Spherical roller bearings CA | 球面滚子轴承 CA

Spherical roller beairngs CA | 球面滚子轴承 CA


Dealing with very heavy radial and axial loads in applications prone to misalignment or shaft deflections? Meet the challenge with spherical roller bearings, whose high load carrying capacity and ability to accommodate misalignment help you obtain low maintenance costs and long bearing service life.

Our assortment includes spherical roller bearings designed for many applications, including CA type, MB type CC type, as well as split type. 

如何在容易产生不对中或轴偏斜的应用中应对非常重的径向和轴向载荷?球面滚子轴承可以帮助应对这项挑战,它的高承载能力和适应不对中的能力,使您能获得低维护成本和长寿命。

如今我们的产品种类适合各种应用,包括CA型,MB型,和CC型。


Product Range | 产品范围

* 22220 - 22280

* 22320 - 22380

* 23030 - 230/1180

* 23130 - 231/1180

* 23230 - 232/1180

* 23930 - 239/1180

* 24030 - 240/1180

* 24130 - 241/1180


Product Standard | 产品标准


Dimension standardsBoundary dimensions: ISO 15, except for the width of sealed bearings with a BS2- designation prefix
Tolerances

For additional information 
Normal
P5 geometrical tolerance on request (designation suffix C08)

Except for:
  • Bearings with d ≤ 300 mm:

    • width tolerance at least 50% tighter than ISO standard 

    • P5 geometrical tolerance

  • Bearings for vibratory applications:

    • P5 bore diameter

    • P6 outside diameter

Values: ISO 492 
Internal clearance

                              
Normal, C3
Check availability of C2, C4 or C5 clearance classes

Bearings for vibratory applications: C4

Bearings for high-speed applications: C4
Check availability of C3 clearance class

Values: ISO 5753-1 (as far as standardized)
  • cylindrical bore 

  • tapered bore 

Values are valid for unmounted bearings under zero measuring load.
Permissible misalignment
  • Guideline values for light to normal loads (P ≤ 0,1 C) and constant position of misalignment relative

    to the outer ring
    Whether these values can be fully exploited depends on the design of the bearing arrangement, the

    bearing abutments in the housing, etc.

  • When the position of the misalignment is not constant relative to the outer ring, additional sliding may

    occur in the bearing, limiting misalignment to a few tenths of a degree.
    Examples are:

    • vibrating screens with rotating imbalance and therefore rotating deflection of the shaft

    • deflection-compensating rolls of paper machines where the stationary shaft is not straight

  • To avoid detrimental effects on sealing performance, misalignment for sealed bearings should not

    exceed 0,5°.


尺寸标准基本尺寸: ISO 15,带 BS2 型号前缀的密封轴承的宽度除外
公差


普通级
按需提供 P5 级几何公差(型号后缀 C08)

除:
  • d ≤ 300 mm 的轴承:

    • 宽度公差至少比 ISO 标准严格 50%

    • P5 级几何公差

  • 振动机械专用轴承:

    • P5 内径

    • P6 外径

值: ISO 492
内部游隙


普通,C3
检查是否提供 C2、C4 或 C5 游隙组别

振动机械专用轴承: C4

适合于高速应用的轴承: C4
订购前请检查 C3 游隙组别的供货情况

数值: ISO 5753-1 (以符合标准为前提)
  • 圆柱孔

  • 圆锥孔

这些数值仅适用于未安装的轴承单元在测量载荷为零的条件下。
允许不对中
  • 参考值适用于以下条件:轻载荷到一般载荷 (P ≤ 0.1 C),且内圈与外圈之间的角度误差不变: 
    能否完全引用这些数值取决于轴承配置的设计、轴承座中的挡肩设计等等。

  • 在某些情况下,内圈与外圈之间的角度误差是会改变的,导致轴承内产生额外滑动,因此内圈与外圈之间的角度误差应小于 1 度。
    例如:

    • 振动筛属于不平衡转动的工况,因此轴挠曲的角度也在转动

    • 在造纸机中专门为补偿挠曲的滚筒,其静止轴不是直的

  • 为了避免对密封性能造成不良影响,密封轴承的不对中不应超过 0.5°。



INQUIRY

CONTACT US

Contact: Michael

Phone: +86-13700043141

E-mail: m8108@qq.com

Add: Dongchangchun Road, Wafangdian, Liaoning, China 辽宁省瓦房店市东长春路